KIT CALI-BUR – Rethinking IPR

KIT CALI-BUR

Precision, control and safety in one kit:

With the new KIT CALI-BUR, clinicians now have a specially developed solution for Interproximal Reduction (IPR) in modern orthodontic treatment.

The FG 464 F is the centerpiece of the kit. Its almost cylindrical working geometry enables controlled and reproducible enamel reduction and supports the precise implementation of the IPR values defined in the treatment plan. The kit contains 10 FG 464 F burs with diameters of 0.3 mm, 0.4 mm and 0.5 mm.

The short working length improves instrument stability and reduces the risk of breakage. At the same time, the geometry supports more anatomical contact areas and helps prevent unintended over-reduction.

A thoughtfully designed kit. One clear goal: precise IPR.

Daniele Rondoni’s KITS-EN

Daniele Rondoni’s KITS – Precision for Zirconia and Ceramics

Two specially developed instrument sets for the precise finishing of zirconia and ceramic materials.

Modern digital dentistry continues to open up new possibilities for creating highly aesthetic and functional restorations. At the same time, the demands for precision, control and natural-looking results are constantly increasing.

Together with Daniele Rondoni, active member of the EAED, IAED, Styleitaliano and SICED, as well as a lecturer and trainer in aesthetic dentistry, HORICO has developed two specially tailored instrument sets: KIT RON-ZIR for zirconia and KIT RON-CER for ceramics.

KIT RON-ZIR – Precision in Zirconia Finishing

The introduction of innovative multilayer zirconia materials, combining high aesthetics with increasingly advanced mechanical properties, has further enhanced the digital workflow in the dental laboratory. At the same time, these materials require precise manual finishing to achieve functional and anatomical details.

The pre-sintered state of zirconia allows for precise and controlled manual finishing, making it possible to refine the shape, contours and anatomical details before sintering. This is exactly where KIT RON-ZIR comes in.

The set has been developed to provide dental technicians with the right instruments to precisely and reproducibly define shape, contours and anatomical details.

The carefully selected instrument sequence enables fast and controlled finishing – from initial shaping to detailed surface refinement. This allows the natural shape of the tooth to be recreated step by step, with a high level of control throughout the process.

The result: a structured workflow, precise shaping and reproducible results.

KIT RON-CER – Controlled Finishing of Ceramics

Modern ceramic materials also place high demands on finishing and refinement. KIT RON-CER has been specifically developed for the targeted finishing of ceramic materials, helping users achieve precise control over shape, surface and functional details.

The carefully selected and arranged instruments follow a clear, practice-oriented finishing strategy. This allows ceramic restorations to be processed efficiently while enabling precise refinement of individual contours and surface details.

For greater control, confidence and precision when individually finishing aesthetic ceramic restorations.

Developed from Practical Experience

With Daniele Rondoni’s KITS-DE, HORICO combines the expertise of an internationally active specialist in aesthetic dentistry with HORICO’s long-standing experience in the development and manufacture of rotary instruments.

Two materials. Two tailored workflows. One goal: maximum control and precision in the individual finishing of aesthetic restorations.

Click here to view the brochure

Kit for Children Primary Teeth

HORICO Kids Kit for Primary Teeth

KIT KID1 – specially designed for pediatric dentistry

The set KIT KID1 offers a practical selection of instruments specifically designed for the preparation of primary teeth.

The kit combines diamond and carbide instruments as well as round burs for key applications in pediatric dentistry. Whether for extended fissure sealing, cavity preparation or crown preparation – the relevant instruments are conveniently combined in one kit and ready to use.

Designed with pediatric dentistry in mind

A particular advantage of the kit is the inclusion of short-shank instruments (FGS / ISO 313). They facilitate access during treatment and are especially useful for patients with limited mouth opening.

Key benefits at a glance

Instrument selection specifically designed for primary teeth
Suitable for extended fissure sealing, cavity and crown preparation
Combination of diamond and carbide instruments and round burs
Short-shank instruments (FGS / ISO 313) for easier access in patients with limited mouth opening
Practical selection of instruments, ready to hand when needed

Focused on pediatric dentistry

With the HORICO Kids KIT KID1, HORICO expands its range with an instrument kit tailored to the specific requirements of primary tooth treatment.

Discover the new instrument solution for pediatric dentistry.

PDF-Flyer

KIT AS – Preparation of veneers

KIT AS – Precise Veneer Preparation

Controlled Precision for Veneer Preparation

The HORICO KIT AS has been developed for dentists who value a safe, precise and controlled approach to veneer preparation.

The system enables defined reduction of tooth structure and supports the achievement of a reproducible preparation depth. This allows the required veneer thickness to be determined more precisely – an important foundation for mechanical stability and the desired aesthetic result.

AS Depth Marker – Defined Preparation Depth

At the heart of the KIT AS are the newly developed HORICO AS Depth Markers. These specially designed diamond instruments provide clear orientation and control of the desired reduction depth.

The AS Depth Marker is a partially diamond-coated instrument for controlled and minimally invasive reduction of enamel, dentin and composite.

Its special geometry supports controlled instrument guidance during preparation. The right-angled instrument shoulder serves as an additional guide for controlled movement of the turbine. A stabilizing ring supports instrument control and helps prevent excessive penetration and tilting during use.

Four Defined Preparation Depths

The AS Depth Markers are available in four defined reduction depths:

0.3 mm
0.5 mm
0.7 mm
1.0 mm

This allows the preparation depth to be selected according to the individual clinical requirements.

A Complete System for Veneer Preparation

In addition to the AS Depth Markers, the KIT AS includes conical diamond instruments in coarse and fine grits as well as matching Lamello polishers.

The instruments are coordinated with the individual steps of the procedure and support a structured workflow – from depth orientation and preparation through finishing and polishing.

Key Benefits at a Glance

Controlled reduction of tooth structure
Defined preparation depths from 0.3 to 1.0 mm
Suitable for working on enamel, dentin and composite
Stabilizing ring to support controlled instrument guidance

PAUL Diamond Strip Holder

The PAUL Strip Holder with a pre-mounted diamond strip is ready to use and delivers precise results for interproximal finishing, restoration contouring, and interproximal enamel reduction (IPR). Available in various strip thicknesses and grit sizes, as well as a serrated non-diamond version. Autoclavable, sustainably packaged and Made in Germany.

Carbide crown cutters

– heads made from finest tungsten carbide
– high precision toothing
– higher lifetime through exact centricity
– reduced vibrations through steel shank

NE cutter / NEF cutter

NE / NEF Carbide Cutters – Efficiently Processing NPM Alloys

A smarter way to work with hard non-precious metal alloys.

Hard non-precious metal (NPM) alloys can make efficient processing a real challenge in the dental laboratory. With the HORICO NE and NEF carbide cutters, we offer a specialised solution that combines fast material removal with fine finishing – helping to simplify the workflow from initial shaping through to pre-polishing.

Two specialised cuts for an efficient workflow

The specially developed groove geometry of the NE cut and NEF cut is designed specifically for working with NPM alloys. Unlike conventional fine-cut instruments, their distinctive groove pattern allows even extremely hard alloys to be processed efficiently and economically.

NE cut – for fast material removal: Designed for efficient shaping and rapid removal of material, even on hard NPM alloys.
NEF cut – for fine finishing: Produces a fine, even surface and provides an excellent preparation for subsequent polishing.

Both cutting geometries are available in a range of popular cutter shapes, allowing the essential laboratory workflow to be covered with just two instruments – from finishing the cast framework to pre-polishing.

Key benefits

Fast: Efficient material removal on hard NPM alloys
Long-lasting: High wear resistance for economical laboratory work
Fine: Excellent surface preparation for polishing
Efficient: Two specialised cuts cover the key processing steps
Versatile: Available in a range of proven cutter shapes

HORICO NE & NEF Carbide Cutters – two specialised cutting geometries for efficient NPM processing, from shaping to pre-polishing.

Black-coated cutters

Black-Coated Cutters – Built for Efficient Laboratory Work

Long tool life, cool operation and precise results – for demanding applications in the dental laboratory.

When working with hard materials in the dental laboratory, efficient material removal, high wear resistance and a clean surface finish are essential. The black-coated HORICO tungsten carbide cutters combine these qualities to support efficient and economical work in everyday laboratory use.

Their particularly smooth black coating helps reduce heat generation during cutting and supports long tool life. Thanks to their high cutting efficiency, material can be removed quickly and precisely – even when working with demanding materials.

The cutters can be used with very little pressure. This enables controlled, ergonomic and wrist-friendly working, making longer working sessions more comfortable.

Designed for Demanding Laboratory Applications

Long Tool Life: Durable cutters for economical everyday use in the dental laboratory.
Cool Cutting: The particularly smooth black surface helps reduce heat generation.
High Cutting Efficiency: Efficient material removal with minimal pressure.
Clean Surface Finish: For controlled and precise results.
Versatile Applications: Designed for use with a wide range of hard materials.

Different Angle Options and Tooth Configurations

The black-coated HORICO tungsten carbide cutters are available in different versions: from the standard 0° version to angled versions of 1°, 2°, 4° and 6°. Different tooth configurations allow users to select the right cutter for the specific application.

HORICO Black-Coated Cutters – Precision you can rely on.

Discover the complete range of HORICO Carbide Cutters →

Lion family burs

Works efficiently even with the hardest materials

The gold-plated Lion burs are our premium diamond burs designed especially for extremely hard materials such as glass ceramics and zircon, and of course for any other material. In comparison to many other similar products, they have more than 20% stronger cutting power, create less heat at the same pressure and are amazingly good value for money.

The advantages of the Lion diamond burs at a glance:

Quicker – shorter treatment times due to having at least 20% stronger cutting power
Cooler – reduced heat generation, since less work pressure is required
Duration – excellent lifespan
Cheaper – superior value for money

All Lion burs

HORICO – Virtual Product Advisor

Which Instrument Is Right for Your Application?

Find out with the HORICO Virtual Product Advisor.

Our Virtual Product Advisor helps you quickly and easily find the right instrument for your specific application – whether you work in a dental practice or dental laboratory.

Simply answer a few questions about your application and discover suitable HORICO instruments and solutions from our product range.

Easy to use. Easy to find.

Discover the HORICO Virtual Product Advisor and find the right instrument for your needs:

Explore the HORICO Virtual Product Advisor →

Enjoy exploring!

KIT CALI-BUR – Rethinking IPR

Category: Uncategorized